How to Set the Time on a Nike Watch

Mid adult man standing at street, looking at watch

Nike makes numerous different models of watch. The common denominator between how you set the time on them is that you hold one side button to enter setting mode, press the same button to toggle through the different time elements and press another side button to advance the time element that is blinking. Some of these models have two clocks, which can set separately for separate time zones.

Ambient Alpine

Press the lower-left side button to get to the time display.

Hold the lower-right button for three seconds, to set the hour blinking. Adjust the hour up or down by pressing the lower-left button. Hold it in for rapid advance.

Toggle to minutes and seconds with the lower-right side button. Advance them with the lower-left button.

Keep pressing the lower-right button to get to the 12-/24-hour display option. Use the lower-left button to choose between the two.

Press the lower-right button to save changes. The time elements will all top blinking.

Tempest

Press the lower-left side button to get to the time display.

Hold the upper-left button for three seconds, to set the hour blinking. Adjust the hour up or down by pressing the upper-right button.

Toggle to minutes and seconds with the lower-right side button. Advance them with the upper-right button.

Keep pressing the lower-right button to get to the 12-/24-hour display option. Use the upper-right button to choose between the two.

Press the upper-left button to save changes. The time elements will all top blinking.

Press and hold the lower-right button to enter the other clock’s display. Repeat the instructions above to reset it.

Hammer/Anvil

Press the lower-left side button to get to the time display.

Hold the upper-left button for three seconds, to set the hour blinking. Increment the hour by pressing the upper-right button.

Toggle to minutes, seconds, year, 12-/24-hour display and so on with the lower-left side button. Advance them with the upper-right button.

Toggle through all the time elements with the lower-left button.

Toggle over to the other clock by holding in the lower-right side button for three seconds. Repeat the above instructions to set it.